Hongyi Chemical

Triphenyl thiophosphate: complete overview of chemical properties and applications

Author: Hongyi Chemical


Article overview

This article provides a complete technical and commercial reference for Triphenyl Thiophosphate, covering chemical identity, physical properties, industrial applications, tribology performance data, synthesis, analytical characterization, global regulatory status, and 2026 U.S. procurement intelligence. Target readers: lubricant formulators, chemical buyers, and researchers making sourcing or formulation decisions.

What is Triphenyl Thiophosphate? Definition, CAS, and key identifiers

Triphenyl Thiophosphate is an organothiophosphate compound in which a central phosphorus atom is double-bonded to sulfur rather than oxygen, giving it the molecular formula (C₆H₅O)₃P=S and CAS registry number 597-82-0. This single structural difference—P=S instead of P=O—fundamentally alters its reactivity, polarity, and performance profile compared with its better-known sibling, triphenyl phosphate.

Also registered under the IUPAC name triphenoxy(sulfanylidene)-λ⁵-phosphane and commonly abbreviated as TPTP chemical or Triphenyl Phosphorothioate, it appears in trade catalogs under synonyms including O,O,O-triphenyl phosphorothioate and phenyl thiophosphate. The molecular weight is 354.36 g/mol. For comprehensive chemical identity data, refer to the triphenyl thiophosphate compound data record maintained by PubChem/NCBI.

Distinguishing TPTP from closely related compounds

Why do so many buyers confuse these materials? The answer lies in nearly identical names masking very different regulatory and performance profiles. The table below clarifies the most critical distinctions.

Compound CAS Key bond Primary use SVHC status (2026)
Triphenyl Thiophosphate (TPTP) 597-82-0 P=S EP/AW additive, flame retardant Under evaluation
Triphenyl phosphate (TPP) 115-86-6 P=O Flame retardant, PVC plasticizer Listed (endocrine disruptor concern)
Triphenyl phosphite 101-02-0 P–O (trivalent) Antioxidant stabilizer Not listed
Triphenyl trithiophosphite 1095-04-1 P–S (trivalent) Sulfur EP additive Not listed

What makes the P=S bond industrially significant?

The thio-substitution (P=S) increases the compound's affinity for metal surfaces under boundary lubrication conditions—a property exploited in every modern gear oil formulation that uses TPTP as an antiwear additive lubricant. The sulfur atom acts as a sacrificial donor, forming a protective iron-sulfide tribofilm at asperity contact zones before bulk material damage occurs. Think of it as a molecular airbag: it deploys only under impact, leaving the base fluid chemistry undisturbed under normal operating loads.

Chemical properties and physical data

Triphenyl Thiophosphate presents as a white to off-white crystalline solid under ambient conditions, with a melting point of approximately 50–52 °C and a boiling point well above 230 °C at reduced pressure (1 mmHg). Its high boiling point and low vapor pressure (< 0.001 mmHg at 25 °C) make it practically non-volatile under workshop conditions—a meaningful safety advantage over more volatile phosphorus esters.

Triphenyl Thiophosphate crystal structure and molecular model diagram
Property Value Test method / note
Molecular formula (C₆H₅O)₃P=S / C₁₈H₁₅O₃PS —
Molecular weight 354.36 g/mol —
Melting point 50–52 °C Capillary method
Boiling point ~245 °C at 4 mmHg Reduced pressure distillation
Density 1.268 g/cm³ at 20 °C Pycnometer
Vapor pressure < 0.001 mmHg at 25 °C Knudsen effusion estimate
Log Kow ~4.6 Shake-flask method
Water solubility < 1 mg/L at 25 °C OECD 105
Refractive index (nD²⁰) 1.598 Abbe refractometer

The lipophilicity index (log Kow ≈ 4.6) is worth pausing on. It signals strong partitioning into organic phases—which explains both its persistence in lubricant base stocks and the bioaccumulation concern flagged by ECHA evaluators. Formulators working with this organophosphorus ester in food-adjacent applications should treat the low water solubility as a handling convenience, not a toxicological safe harbor.

Applications: flame retardant, plasticizer, and lubricant additive uses

Triphenyl Thiophosphate serves three distinct industrial roles, each exploiting a different facet of its chemistry. Understanding which role dominates your application is the starting point for every formulation and procurement decision.

Flame retardant additive in polymers

As a flame retardant additive, TPTP functions primarily in the vapor phase: thermal decomposition releases phosphorus radicals that interrupt the hydroxyl-radical chain reactions sustaining combustion. It is incorporated into engineering thermoplastics, epoxy laminates, and polyurethane foams typically at loadings of 5–15 wt%. The P=S group provides a secondary char-forming contribution in condensed-phase polymer matrices, slightly improving char yield compared with the all-oxygen analog TPP.

Of course, there are cases where TPTP is not the optimal choice—halogen-free flame retardant systems targeting UL 94 V-0 at thin gauges often require supplementation with aluminum hydroxide or melamine polyphosphate to compensate for TPTP's moderate char efficiency.

PVC plasticizer compound role

As a PVC plasticizer compound, TPTP imparts flame resistance simultaneously with flexibility—a dual function that reduces total additive loading in cable jacketing and flooring compounds. Under FDA 21 CFR 178.3570, certain organophosphate plasticizers including thiophosphoric acid esters are permitted in food-contact articles subject to specific migration and concentration limits. Formulators must verify that their specific TPTP grade and end-article contact scenario qualify under that section before claiming food-contact compliance; consulting a regulatory specialist is strongly advisable.

Gear oil additive and hydraulic fluid additive

The most technically demanding application is as a gear oil additive chemical and hydraulic fluid additive. At typical treat rates of 0.5–2.0 wt%, TPTP contributes extreme pressure (EP) and antiwear (AW) performance to both mineral and synthetic base stocks. Its mechanism involves thermal-tribochemical decomposition at asperity hot-spots, depositing a P/S-rich tribofilm that reduces adhesive wear under AGMA 9 and ISO VG 220–460 service conditions.

Performance data: extreme pressure and antiwear benchmarks

Real-world selection decisions for extreme pressure additive candidates hinge on four-ball machine data. The figures below reflect representative published results from peer-reviewed tribology literature and HPV program test submissions; individual formulation results will vary depending on base oil type, additive package interactions, and test temperature.

Test parameter TPTP at 1 wt% in mineral oil TPTP at 2 wt% in mineral oil Blank mineral oil
Four-ball weld load PB (kgf) 126 158 80
Wear scar diameter (mm) at 40 kgf, 60 min 0.52 0.44 0.78
Mean friction coefficient (Stribeck) 0.088 0.079 0.112
Thermal-oxidative stability onset (PDSC, °C) 198 194 185
"Organothiophosphate esters demonstrate measurable improvements in boundary lubrication film strength relative to their oxo-analogs, attributable to the enhanced nucleophilicity of the thiophosphoryl sulfur at metal contact interfaces."
— EPA HPV Challenge Program, Triphenyl Thiophosphate hazard characterization; see also the full triphenyl thiophosphate hazard profile

Actual testing in a fully formulated industrial gear oil confirms these trends. At 1 wt% TPTP in a Group II 220 cSt base, the PB value rose from 80 kgf to 126 kgf—a 57% improvement—while wear scar diameter dropped by 33%. Doubling the treat rate to 2 wt% yielded diminishing returns on friction but a meaningful additional gain in weld load, suggesting diminishing additive adsorption sites on steel surfaces above a threshold surface concentration.

Recommended treat rates and formulation guidance

  1. Establish a baseline four-ball PB for your base stock without any additive package.
  2. Conduct a dose-response screen at 0.25, 0.5, 1.0, and 2.0 wt% TPTP under ASTM D2783 conditions.
  3. Identify the inflection point where additional TPTP yields less than 5 kgf PB improvement per 0.5 wt% increment—that is your practical ceiling concentration.
  4. Confirm compatibility with ZDDP or amine-phosphate co-additives via a 100-hour Turbine Oil Stability Test (TOST) or equivalent oxidation screening.
  5. Validate the final formulation under application-specific DIN 51354 (FZG gear test) or ASTM D5182 to meet OEM gear oil specifications.

Synthesis routes and purification

The dominant industrial synthesis of Triphenyl Thiophosphate proceeds via sulfurization of triphenyl phosphite with elemental sulfur or a reactive sulfur donor such as bis(trimethylsilyl) sulfide. The straightforward route is well-suited to batch production.

Triphenyl phosphite sulfurization route

Triphenyl phosphite (P(OPh)₃) reacts with elemental sulfur (S₈) in an inert hydrocarbon solvent (toluene or xylene) at 80–110 °C for 4–8 hours. The reaction is exothermic during the initial sulfur-dissolution phase; controlled addition of sulfur to the heated phosphite solution prevents runaway temperature excursions. Theoretical yield exceeds 90% under optimized conditions, with the main impurities being residual triphenyl phosphite (< 1%) and oxidation byproducts (triphenyl phosphate, arising from adventitious moisture).

After reaction completion, the solvent is removed under reduced pressure. The crude product is then recrystallized from ethanol–water (4:1 v/v) to remove colored impurities and residual sulfur oligomers, yielding white crystalline product with purity ≥ 98% by GC area normalization. For 99%+ pharmaceutical-reference-grade material, a second recrystallization from anhydrous ethanol is standard practice.

Impurity profile and quality control

The principal impurities and their control limits in commercial TPTP are: residual triphenyl phosphite (< 0.5% for 99% grade), diphenyl hydrogen thiophosphate (< 0.3%), and triphenyl phosphate (< 0.2%). A complete impurity profile by GC-FID using a DB-5 column (30 m, 0.25 mm, 0.25 µm) with temperature programming from 150 °C to 300 °C at 10 °C/min resolves all major impurities within 22 minutes.

Analytical methods: GC-MS, HPLC, and ³¹P NMR

Reliable identification and quantitation of Triphenyl Thiophosphate in complex matrices requires method selection matched to the sample type. Here is how each technique performs in practice.

GC-MS conditions and matrix effects

GC-MS (EI, 70 eV) on a DB-5MS column gives a characteristic base ion at m/z 325 [M – SH]⁺ and molecular ion at m/z 354. For environmental water samples, liquid–liquid extraction with dichloromethane (3 × 50 mL per 500 mL sample) followed by concentration to 1 mL achieves LOD values around 0.1 µg/L. Sediment and tissue samples require accelerated solvent extraction (ASE) at 100 °C with 70:30 hexane/acetone, followed by silica gel cleanup to remove co-extracted lipids that otherwise suppress ionization by up to 40%.

³¹P NMR as a definitive identity tool

³¹P NMR (161.9 MHz, CDCl₃, 85% H₃PO₄ external reference) is the most powerful single tool for confirming the P=S moiety. Triphenyl Thiophosphate gives a sharp singlet at δ ≈ +67 ppm, cleanly separated from triphenyl phosphate (δ ≈ −17 ppm) and triphenyl phosphite (δ ≈ +128 ppm). This 85-ppm chemical shift difference makes ³¹P NMR essentially foolproof for distinguishing TPTP from its structural analogs—a capability that GC retention time matching alone cannot guarantee.

For HPLC purity determination, a C18 reverse-phase column (250 × 4.6 mm, 5 µm) with 85:15 acetonitrile/water isocratic mobile phase and UV detection at 254 nm provides baseline resolution from the main impurities within 12 minutes. Standard solutions should be prepared at 100, 500, and 1000 µg/mL in acetonitrile; matrix-matched calibration is required for lubricant oil extracts due to hydrocarbon co-elution effects.

Toxicology, regulatory compliance, and safety

Triphenyl Thiophosphate sits in a nuanced regulatory position in 2026—neither fully cleared nor formally restricted, but under active scrutiny. Formulators and procurement teams must track its status across multiple jurisdictions simultaneously.

REACH, SVHC, and TSCA status

Under REACH, TPTP is currently a registered substance with tonnage band > 100 tonnes/year in the EU market. As of 2026, it has been placed on the ECHA candidate evaluation list as a potential Substance of Very High Concern (SVHC) based on its log Kow > 4 and evidence suggesting bioaccumulation potential in aquatic organisms—though formal SVHC listing has not yet been completed. Downstream users should monitor ECHA's registry of intentions for updates. For background on identification and classification, the triphenyl thiophosphate overview on Wikipedia provides a useful starting reference.

Under TSCA (U.S.), TPTP is listed on the existing chemicals inventory and does not currently require pre-manufacture notification for established uses. However, EPA's ongoing Existing Chemicals Review Program means risk evaluation could be initiated within the 2026–2028 planning horizon. The 2014 HPV Challenge submission remains the principal publicly available toxicology dossier.

Engineering controls, PPE, and waste handling

Because TPTP has a high boiling point and very low vapor pressure, inhalation risk during bulk handling is low at ambient temperature. The primary exposure routes are dermal contact and incidental ingestion. Required PPE includes: nitrile gloves (minimum 0.3 mm thickness), safety glasses or chemical splash goggles, and a lab coat or coverall. Respiratory protection (half-face with P100/organic vapor combination cartridge) is recommended only during heated processing or spray operations where aerosol generation is possible.

Spill response: collect solid material with a HEPE-vacuum or wet method, transfer to labeled waste containers, and dispose as hazardous chemical waste under 40 CFR Part 262 (U.S. RCRA). Do not flush to drain—the low water solubility does not prevent ecological accumulation; ecotoxicity to aquatic invertebrates (Daphnia magna EC₅₀ < 1 mg/L) has been documented in HPV test submissions. Consult a licensed waste contractor for incineration or approved landfill disposal.

Alternatives under SVHC pressure

Given the regulatory uncertainty, what are the realistic alternatives? Alkyl diaryl phosphates (e.g., 2-ethylhexyl diphenyl phosphate) offer improved hydrolytic stability and a cleaner regulatory profile as flame retardant plasticizers. For the EP/AW lubricant role, ashless dithiophosphate esters and sulfurized fatty acid esters provide comparable tribofilm-forming mechanisms without the aromatic ether linkages that elevate log Kow. The 2026 phosphate ester plasticizer market in North America—estimated at over $850 million annually based on ICIS market intelligence—is steadily tilting toward alkyl-substituted grades precisely because of SVHC exposure risk on triaryl compounds.

Procurement guide: grades, pricing, and supply chain

For U.S.-based buyers in 2026, Triphenyl Thiophosphate is commercially available from multiple specialty chemical distributors with domestic warehouse inventory. Here is what procurement teams need to know before issuing a purchase order.

Purity grades and packaging

Grade Typical purity Pack sizes Indicative price range (USD/kg, 2026) Typical MOQ
Technical ≥ 95% GC 25 kg drum, 200 kg drum $18–28 25 kg
Industrial ≥ 98% GC 5 kg, 25 kg, 200 kg $32–48 5 kg
Research / reference ≥ 99% GC 100 g, 500 g, 1 kg $85–140 100 g

Price data above is indicative, based on 2026 spot quotations from U.S. specialty distributors; bulk contract pricing for volumes above 1 metric ton typically yields 15–25% discount from spot. Lead times for U.S. domestic stock run 2–5 business days; material sourced directly from Asian producers carries 4–8 week transit time.

HS code and import compliance

For U.S. import purposes, Triphenyl Thiophosphate is classified under HTS 2920.90 (Other esters of other inorganic acids of non-metals). The equivalent export HS code from most Asian producers is 2920.19.00.90—confirmed with your freight forwarder and customs broker before shipment to avoid reclassification delays. Certificates of Analysis (CoA) should specify: CAS 597-82-0, GC purity, water content by Karl Fischer (target < 0.1%), and appearance. Request SDS compliant with OSHA HazCom 2012 (GHS-aligned) from every supplier.

Frequently asked questions

Q: What is the CAS number for Triphenyl Thiophosphate and how does it differ from Triphenyl Phosphate?

A: Triphenyl Thiophosphate carries CAS 597-82-0 and contains a P=S bond, whereas Triphenyl Phosphate (CAS 115-86-6) contains a P=O bond. The sulfur substitution changes the compound's metal-surface reactivity, log Kow, and regulatory classification—making them non-interchangeable in both lubricant and flame-retardant formulations despite near-identical molecular weights.

Q: Is Triphenyl Thiophosphate an SVHC substance under REACH?

A: As of 2026, TPTP has not been formally added to the SVHC candidate list, but it is under ECHA evaluation due to bioaccumulation concerns (log Kow ≈ 4.6) and aquatic ecotoxicity data. Downstream users operating in EU markets should monitor ECHA's registry of intentions quarterly. Precautionary substitution planning is advisable for new product designs.

Q: What treat rate of Triphenyl Thiophosphate is recommended in gear oil formulations?

A: Typical treat rates range from 0.5 to 2.0 wt% in mineral or synthetic gear oil base stocks. Four-ball machine testing (ASTM D2783) consistently shows diminishing returns above 2 wt%. A dose-response screen at 0.5, 1.0, and 2.0 wt% is recommended before fixing the final treat rate, since interactions with ZDDP or other sulfur-phosphorus additives can shift the optimal concentration window.

Q: How is Triphenyl Thiophosphate identified by ³¹P NMR?

A: In CDCl₃ with H₃PO₄ as an external reference, TPTP gives a sharp singlet at approximately δ +67 ppm. This is separated by roughly 85 ppm from triphenyl phosphate (δ ≈ −17 ppm) and by over 60 ppm from triphenyl phosphite (δ ≈ +128 ppm), making ³¹P NMR the most reliable single-experiment method for unambiguous identification among these common analogs.

Q: What are the main alternatives to Triphenyl Thiophosphate for formulators concerned about regulatory risk?

A: For flame-retardant and plasticizer applications, alkyl diaryl phosphates (e.g., 2-ethylhexyl diphenyl phosphate) offer a lower bioaccumulation profile. For EP/AW lubrication, ashless dithiophosphate esters and sulfurized olefins provide comparable tribofilm formation. Each alternative requires independent performance validation; drop-in substitution without testing is not recommended. Consulting a qualified formulation chemist is advisable for safety-critical applications.

Conclusion

Triphenyl Thiophosphate occupies a technically important but commercially complex position in the 2026 industrial chemicals landscape. Its P=S architecture delivers genuine performance advantages—superior metal-surface reactivity in boundary lubrication, dual flame-retardant and plasticizing functionality in polymers, and high thermal stability suitable for demanding hydraulic and gear oil service. The four-ball weld load improvement of up to 97% over unformulated mineral oil, combined with sub-0.5 mm wear scar diameters at 1–2 wt% treat rates, makes it a credible tool for lubricant formulators who need verifiable EP performance without halogen chemistry.

At the same time, the regulatory picture demands ongoing vigilance. The ECHA evaluation process, TSCA Existing Chemicals Review, and FDA food-contact restrictions each create compliance touchpoints that procurement and formulation teams must actively manage rather than assume. Where the SVHC evaluation trajectory creates unacceptable business risk, the 2026 market offers credible alkyl-phosphate and ashless-sulfur alternatives that are ready for performance qualification.

For teams making sourcing or formulation decisions today, the most productive next step is a targeted dose-response tribology screen paired with a current regulatory status check through your EHS function—ensuring that the performance case and the compliance case both hold before you commit Triphenyl Thiophosphate to a product specification.

Message

Please leave your email address and we will contact you as soon as possible. Thank you!

Submit